Why ERP does not stick in small manufacturing Küçük imalatta ERP neden tutmuyor
A workshop of thirty people buys an ERP system. There is a kickoff, a consultant, two weeks of training. By the third month the stock module is wrong, the production module is empty, and the real planning has moved back to a whiteboard and a group chat. The licence keeps being paid for another year because cancelling it would be admitting something.
I have watched this from both sides — as the engineer whose work the system was supposed to capture, and later as the person building one. These are the five reasons I keep coming back to.
1. It asks for data nobody has time to enter
Enterprise systems are designed around complete, timely data entry. They assume somebody will record every stock movement, every operation start and stop, every scrap event, within minutes of it happening.
In a thirty-person shop the person who would enter that data is also operating the press. So the entry happens at the end of the week, from memory, or not at all. Within a month the figures in the system and the figures in the warehouse diverge, and the moment people stop believing the number on the screen, nobody opens the screen again.
The fix is not discipline. It is designing so that the data is a by-product of work people already do — and accepting approximate data where exact data would cost an operator's attention.
2. It models a factory that does not exist
Standard ERP assumes repeating products with stable bills of material. A project shop has neither. Every greenhouse is a different span, a different site slope, a different wind load. The bill of material is an output of engineering, not an input to it.
Systems built around the first assumption force the engineer to invent a fake product code for every project just to make the software happy. That is a tax paid daily, and taxes paid daily get avoided.
3. Nobody owns the gap between modules
The quotation lives in one module, the production order in another, purchasing in a third. Each works. The handover between them is a human copying numbers.
That handover is exactly where the errors are, and it is the part no configuration screen covers. In a large company there is a person whose job is that seam. In a small one there is not, so the seam stays manual and the system is, in practice, three spreadsheets with a licence fee.
4. The interface is built for the office, not the floor
Dense grids, twelve-column forms, required fields the operator cannot answer. The floor is a place with gloves, bad lighting, and ninety seconds between cycles. Any interaction that takes more than a few seconds will be skipped, and a skipped interaction is a hole in the data.
What works on the floor is almost embarrassingly simple: large targets, one decision per screen, defaults that are right nine times out of ten, and nothing that blocks on a field somebody else should have filled in.
5. It is never finished, and nobody is there to finish it
Every shop has a dozen small rules that are not in any standard package: this customer always wants galvanised, that profile is ordered in six metre lengths only, this mold needs maintenance every four thousand strokes. A packaged system cannot know them. A consultant bills for each one.
So the rules stay in people's heads, the system stays generic, and generic software loses to a whiteboard every time — because the whiteboard is edited by the person who knows.
What I did differently
I did not set out to build an ERP. I set out to stop re-counting the same profiles. The system grew from one real bottleneck outward, and that constraint turned out to be the design method:
- Start from the drawing, because that is where every project actually starts.
- Make data entry a by-product — a quotation produces the material list, which produces the purchase requirement, which produces the stock movement. Nobody types the same number twice.
- Let the engineer who knows the rules change the rules, without a consultant and without a release.
- Show unresolved items instead of plausible totals.
- Ship it to one floor, watch what people avoid using, and delete that part.
None of this is a technical insight. It is the ordinary observation that software for a small manufacturer has to be built by somebody who has stood at the machine, and has to keep being built as long as the shop is working. The hard part of manufacturing software was never the software.
Otuz kişilik bir atölye ERP alır. Açılış toplantısı yapılır, danışman gelir, iki hafta eğitim verilir. Üçüncü ayda stok modülü yanlıştır, üretim modülü boştur ve gerçek planlama beyaz tahtaya ve WhatsApp grubuna geri dönmüştür. Lisans bir yıl daha ödenir, çünkü iptal etmek bir şeyi kabul etmek olur.
Bunu iki taraftan da izledim — önce sistemin kaydetmesi beklenen işi yapan mühendis olarak, sonra böyle bir sistemi kuran kişi olarak. Sürekli döndüğüm beş sebep şunlar.
1. Kimsenin girecek vakti olmayan veriyi istiyor
Kurumsal sistemler eksiksiz ve zamanında veri girişi varsayımıyla tasarlanır. Her stok hareketinin, her operasyon başlangıç ve bitişinin, her fire kaydının olduktan dakikalar sonra girileceğini kabul ederler.
Otuz kişilik bir atölyede o veriyi girecek kişi aynı zamanda presi kullanan kişidir. Dolayısıyla giriş hafta sonunda, hafızadan ya da hiç yapılmaz. Bir ay içinde sistemdeki rakamla depodaki rakam ayrışır ve insanlar ekrandaki sayıya inanmayı bıraktığı an, ekranı bir daha kimse açmaz.
Çözüm disiplin değil. Çözüm, verinin insanların zaten yaptığı işin yan ürünü olacağı şekilde tasarlamak — ve kesin verinin bir operatörün dikkatine mal olduğu yerde yaklaşık veriyi kabul etmek.
2. Var olmayan bir fabrikayı modelliyor
Standart ERP, sabit ürün ağaçlarına sahip tekrar eden ürünler varsayar. Proje tipi bir atölyede ikisi de yoktur. Her sera farklı bir açıklık, farklı bir arazi eğimi, farklı bir rüzgar yüküdür. Ürün ağacı mühendisliğin girdisi değil, çıktısıdır.
İlk varsayım üzerine kurulu sistemler, mühendisi yalnızca yazılımı mutlu etmek için her projeye sahte bir ürün kodu uydurmaya zorlar. Bu, her gün ödenen bir vergidir; her gün ödenen vergilerden de kaçılır.
3. Modüller arasındaki boşluğun sahibi yok
Teklif bir modülde, üretim emri başka birinde, satın alma üçüncüsünde yaşar. Her biri çalışır. Aralarındaki devir, sayıları kopyalayan bir insandır.
Hatalar tam olarak o devirde oluşur ve bu, hiçbir ayar ekranının kapsamadığı kısımdır. Büyük bir şirkette işi bu dikiş yeri olan bir kişi vardır. Küçüğünde yoktur; dikiş elde kalır ve sistem pratikte lisans ücreti olan üç Excel dosyasıdır.
4. Arayüz saha için değil, ofis için tasarlanmış
Sıkışık tablolar, on iki sütunlu formlar, operatörün cevaplayamayacağı zorunlu alanlar. Saha; eldivenin, kötü aydınlatmanın ve iki çevrim arasındaki doksan saniyenin olduğu yerdir. Birkaç saniyeden uzun süren her etkileşim atlanır ve atlanan her etkileşim veride bir deliktir.
Sahada işe yarayan şey utandıracak kadar basit: büyük hedefler, ekran başına tek karar, onda dokuz doğru olan varsayılanlar ve başkasının doldurması gereken bir alanda tıkanmayan akışlar.
5. Hiç bitmiyor ve bitirecek kimse yok
Her atölyenin hiçbir hazır pakette olmayan bir düzine küçük kuralı vardır: şu müşteri her zaman galvaniz ister, şu profil yalnızca altı metre boyunda sipariş edilir, şu kalıp dört bin vuruşta bir bakım ister. Paket bir sistem bunları bilemez. Danışman her biri için fatura keser.
Sonuçta kurallar insanların kafasında kalır, sistem genel kalır ve genel yazılım beyaz tahtaya her seferinde yenilir — çünkü beyaz tahtayı bilen kişi düzenler.
Ben neyi farklı yaptım
Yola bir ERP yazmak için çıkmadım. Aynı profilleri tekrar tekrar saymayı bırakmak için çıktım. Sistem gerçek tek bir darboğazdan dışa doğru büyüdü ve bu kısıt tasarım yöntemine dönüştü:
- Çizimden başla, çünkü her proje gerçekte oradan başlıyor.
- Veri girişini yan ürün yap — teklif malzeme listesini, o satın alma ihtiyacını, o da stok hareketini üretsin. Aynı sayı iki kere yazılmasın.
- Kuralları bilen mühendis kuralları değiştirebilsin; danışman da sürüm beklemek de gerekmesin.
- Makul görünen toplamlar yerine çözülmemiş kalemleri göster.
- Tek bir sahaya çıkar, insanların kullanmaktan kaçındığı yeri izle ve o kısmı sil.
Bunların hiçbiri teknik bir içgörü değil. Küçük bir imalatçı için yazılımın, makinenin başında durmuş biri tarafından yazılması ve atölye çalıştığı sürece yazılmaya devam etmesi gerektiği şeklindeki sıradan gözlem. İmalat yazılımının zor kısmı hiçbir zaman yazılım olmadı.